Featured Products

Qscan Outdoor 2-D Scanner

Qscan Mini Turnstile and Kiosk Wiegand 12V Imager

Ble1 Bluetooth/Prox Reader

Sproxjx Tri-Technology Reader (barcode / mag / prox)

QscanT Turnstile reader Wiegand 12V Imager with prox and 13.5 Mhz

718R Data Converter with Relay

Fully programmable data converter for access systems, with an internal relay and Usb interface.

 

 
     
The 718R converter is a user programmable converter which will convert any of the following formats:  magnetic stripe (tracks 1 & 2), wiegand (standard, alphanumeric, and aba weigand), serial, wand emulation, and f2f. Up to 250 bits can be processed for both inputs and outputs.  The 718R also contains a form-c relay which can be controlled by serial commands.

The converter has two inputs and two outputs. One of the inputs supports either track 1 magstripe, track 2 magstripe, or standard wiegand. The other input supports Usb serial. For Rs232 support, see the model 716 converter. Each input is programmed separately and operates independently of the other.

In addition to the conversions which are available, the 718R can also dump received data through the serial port, bit by bit. This is a useful function for debugging or identifying the bit streams from proximity and magstripe cards. 

Note that the 718R converter can perform conversions in one direction only. This is due to a limitation on the RJ45 connector. A user-removable jumper on the board allows the 718R to process data from serial (usb) to wiegand, wieaba, alphawie, track1, track2, f2f, and wand emulation, or, convert wiegand, track1, etc. to usb serial.

 

Conversions   Wiegand to Usb serial
    Alphawie to Usb serial
    Wieba to Usb serial
    Track 1 to Usb serial
    Track 2 to Usb serial
    Usb serial to wiegand
    Usb serial to wieaba
    Usb serial to alphawie
    Usb serial to Track 1
    Usb serial to Track 2
    Usb serial to f2f
    Usb serial to wand emulation
Preprocessors   Hex conversion preprocessor
    Amtech toll tag conversions
Good Read Beep   Programmable
Temperature   -40c to +85c
Dimensions   2.8" L x 1.6" W x 0.8" H
Weight   1 ounce
Material   Abs
Power   Model 718 5Vdc
Model 718C 5-12Vdc
Standard Wiring   Type B for usb connection.
Rj45 with supplied flat cable for wiegand inputs and outputs.
Max Input Bits  

500, max 64 bits per field

Relay   30Vdc 300ma Form C
Available Interfaces:   Usb

Programmable by command set or IBC utility software
Firmware Upgradeable
-40c to +85c operation
Form C Relay

No Options Available

No Accessories Available

IBC usb drivers   See software page
IBC Utility Software   716v0199.zip