Featured Products

Qscan Outdoor 2-D Scanner

Qscan Mini Turnstile and Kiosk Wiegand 12V Imager

Ble1 Bluetooth/Prox Reader

Sproxjx Tri-Technology Reader (barcode / mag / prox)

QscanT Turnstile reader Wiegand 12V Imager with prox and 13.5 Mhz

M400

OEM Magstripe reader.

 

 
     

The M400 is a low cost magnetic stripe reader available with either a PC wedge connection (direct connect to a PC keyboard), RS232, wiegand, F2F, or PC port-powered (direct connect to a PC serial port). The PC port-powered version is powered from the PC serial jack and therefore does not need an external power supply. The M400 is available with Track 2, or Tracks 1 and 2. These readers are factory programmable to your specifications. The M400 is available as an OEM product only.

 

Scanning Speed   3-30 ips (7-76 cm/sec)
Scan Direction   bi-directional
Magnetic Stripe   Track 2, Tracks 1&2
Slot Width   0.050"(1.2mm). Other widths upon special request
Indicators   2 leds (optional)
Temperature   -40c to +85c
Dimensions   4.6"L x 2.4"W x 1.4" H (11.6cm x 6cm x 3.5cm)
Weight   6 ounces
Material   black polycarbonate (Noryl optional)
Power   5VDC(75ma), 8-15VDC, or 15-30VDC
Standard Wiring   3' (91cm) cable w/flying leads, db9, or RJ12 jack
Available Interfaces:   RS232
    Wiegand
    Magstripe
    TTL Ascii
    Inverted TTL Ascii
    F2F
     

-40c to +85c operation
Track 2, or Tracks 1&2

5,12, or 24VDC
Led's
Weatherproofing
#6 or 3mm mounting
Side or Rear wiring
Noryl (chemical resistant)
RJ12 jack

Mounting Kit