Featured Products

Qscan Outdoor 2-D Scanner

Qscan Mini Turnstile and Kiosk Wiegand 12V Imager

Ble1 Bluetooth/Prox Reader

Sproxjx Tri-Technology Reader (barcode / mag / prox)

QscanT Turnstile reader Wiegand 12V Imager with prox and 13.5 Mhz

Magbar Jx

IBC's newest generation combination barcode/magstripe reader for connecting to PCs and controllers. The Magbar Jx is user programmable and firmware upgradeable, allowing new features to be added in the field.

The Magbar Jx is a decoded combination barcode and magnetic stripe swipe reader, designed to be used in any application which requires the swiping of a barcode from a card, such as employee IDs, temporary badges, and driver's licenses. The Magbr Jx readers are available in a wide array of industry standard interfaces, are programmable, and may be ordered with a variety of options, such as leds, alphanumeric displays, sense inputs, and relays. Perfect for use in Access Control and Time & Attendance applications. The Magbar Jx is firmware upgradeable, and can read and process Kronos, Cac, Usid, Dbids barcodes, and Aamva driver's licenses.


Scanning Speed   3-30 ips (7-76 cm/sec)
Scan Direction   bi-directional
Symbologies   Code39, 2/5, I2/5, C128, UPCA, EAN13, Codabar
Resolution   7 mil
Read Height   0.4"(1cm) standard, 0.465" optional
Magnetic Stripe   Track 2, Tracks 1&2, or Tracks 2&3
Good Read Beep   programmable
Slot Width   0.050"(1.2mm). Other widths upon special request
Indicators   2 leds (programmable)
Light Source   630nm visible, 940nm infrared
Temperature   -40c to +85c
Dimensions   4.6"L x 2.4"W x 1.4" H (11.6cm x 6cm x 3.5cm)
Weight   6 ounces
Material   black polycarbonate (Noryl optional)
Power   5VDC(150ma), 8-15VDC, or 15-30VDC
Standard Wiring   3' (91cm) cable w/flying leads or connectors depending on interface

30VDC 500ma Form C
12VDC 700ma direct from POE

Sense Inputs   TTL level (minimal current draw)
Available Interfaces:   RS422/485
    ABA (magstripe emulation)
    RS232 wedge
    TTL ascii
    Inverted TTL ascii
    Wand Emulation

Visible or Infrared Optics
1 or 2 tracks
-40c to +85c operation
Reads Kronos Cards, Cac cards, Usid cards, Dbids cards

5,12, or 24VDC
0.400" or 0.465" read height
Internal Relay
Sense Inputs
External keypad support
#6 or 3mm mounting
Side or Rear wiring
Noryl (chemical resistant)

Mounting Kit