Featured Products
Qscan Outdoor 2-D Scanner
Qscan Mini Turnstile and Kiosk Wiegand 12V Imager
Ble1 Bluetooth/Prox Reader
Sproxjx Tri-Technology Reader (barcode / mag / prox)
QscanT Turnstile reader Wiegand 12V Imager with prox and 13.5 Mhz
MagbarUUndecoded combination Barcode and Magstripe reader for connection to controllers.
|
||
The MagbarU an undecoded combination reader which reads both barcodes and magnetic stripes, for use in a variety of applications. The barcode and magstripe outputs are separate, and can be connected to any device that supports undecoded barcode or undecoded magstripe input. The MagbarU is available with either visible or infrared optics, with a TTL or open collector output, and with track2, tracks 1&2, or tracks 2&3 magnetic stripe. |
Scanning Speed | 3-30 ips (7-76 cm/sec) | |
Scan Direction | bi-directional | |
Resolution | 7 mil | |
Read Height | 0.4"(1cm) standard, 0.465" optional | |
Magnetic Stripe | Tracks 1,2, or 3 hi/lo co | |
Slot Width | 0.050"(1.2mm). Other widths upon special request | |
Indicators | 2 leds (optional) | |
Temperature | -40c to +85c | |
Dimensions | 4.6"L x 2.4"W x 1.4" H (11.6cm x 6cm x 3.5cm) | |
Weight | 6 ounces | |
Material | black polycarbonate (Noryl optional) | |
Power | 5VDC(50ma), 8-15VDC, or 15-30VDC | |
Standard Wiring | 3' (91cm) cable w/flying leads or RJ12 jack |
Available Interfaces: | TTL | |
Open Collector |
1 or 2 Tracks
-40c to +85c operation
Visible or Infrared Optics
5,12, or 24VDC
0.400" or 0.465" read height
Led's
Weatherproofing
#6 or 3mm mounting
Side or Rear wiring
Noryl (chemical resistant)
RJ12 jack
Mounting Kit