Featured Products
Qscan Outdoor 2-D Scanner
Qscan Mini Turnstile and Kiosk Wiegand 12V Imager
Ble1 Bluetooth/Prox Reader
Sproxjx Tri-Technology Reader (barcode / mag / prox)
QscanT Turnstile reader Wiegand 12V Imager with prox and 13.5 Mhz
Qscan Outdoor 2-D Scanner
Qscan Mini Turnstile and Kiosk Wiegand 12V Imager
Ble1 Bluetooth/Prox Reader
Sproxjx Tri-Technology Reader (barcode / mag / prox)
QscanT Turnstile reader Wiegand 12V Imager with prox and 13.5 Mhz
Slot1Undecoded Barcode reader for connection to controllers.
|
 |
|
The Slot1 is an undecoded barcode swipe reader, for use in installations where direct barcode input is supported, such as various access control controllers. The Slot1 is available with either visible or infrared optics, with a ttl or open collector output. |
||
| Scanning Speed | 3-30 ips (7-76 cm/sec) | |
| Scan Direction | bi-directional | |
| Resolution | 7 mil | |
| Read Height | 0.4"(1cm) standard, 0.465" optional | |
| Slot Width | 0.050"(1.2mm). Other widths upon special request | |
| Indicators | 2 leds (optional) | |
| Light Source | 630nm visible, 940nm infrared | |
| Temperature | -40c to +85c | |
| Dimensions | 4.6"L x 2.4"W x 1.4" H (11.6cm x 6cm x 3.5cm) | |
| Weight | 6 ounces | |
| Material | black polycarbonate (Noryl optional) | |
| Power | 5VDC(45ma), 8-15VDC, or 15-30VDC | |
| Standard Wiring | 3' (91cm) cable w/flying leads, or RJ12 jack |
| Available Interfaces: | TTL | |
| Open Collector |
Visible or Infrared Optics
-40c to +85c operation
Reads Kronos Cards
5,12, or 24VDC
0.400" or 0.465" read height
Led's
Weatherproofing
#6 or 3mm mounting
Side or Rear wiring
Noryl (chemical resistant)
Rj12 Jack
Mounting Kit